Electronic Battery Charger Li-Ion 18V.
Suitable for: KSS 50 18M bl, ΜΤ 55 18M bl & K55 18M bl.
Powerful 900W.
With level compensation - for constant cutting depth.
With three rollers - to prevent tipping on uneven floors.
• Tool-less rapid locking - for simple, fast tool changes.
• Universal machine - for ring, ring-groove and GEKA dowels.
• Powerful motor and high quality standard means longer service life.
• Tool-less rapid locking - for simple, fast drill bit changes.
• Swiveling focusing device - for simple drill bit changes.
• High quality standard means longer service life.
• Tool-less rapid locking - for simple, fast drill bit changes.
• Swiveling focusing device - for simple drill bit changes.
• High quality standard means longer service life.
• Minimal space requirement - the workpiece always remains in the same position.
• Considerable time-saving - due to quick and easy adjustment of length, angle and tenon dimensions.
• Chip waste is extractable as a matter of course.
• Maximum timber dimensions 500 x 250 mm, at 0° and 200 x 250 mm at 60°.
- Special machine – for all notching and facing tasks.
- Fast, precise adjustment – no test cutting necessary – considerable time-saving.
- All-round protective cover – for optimum user protection.
- Easily extendable thanks to a newly designed steel connecting piece.
- Even the extended guide rails are straight like an arrow thanks to the self-aligning connecting piece.
- With removable rubber lip for fast and clean cutting results.
- Very light in weight for optimal handling.
- Guaranteed non-slip assured by two detachable holding strips on the underside of the guide rail.
- Easily extendable thanks to a newly designed steel connecting piece.
- Even the extended guide rails are straight like an arrow thanks to the self-aligning connecting piece.
- With removable rubber lip for fast and clean cutting results.
- Very light in weight for optimal handling.
- Guaranteed non-slip assured by two detachable holding strips on the underside of the guide rail.
• High quality standard means lower machine costs and longer service life.
• Practical lightweight, ergonomic handle ensures exemplary handling.
• With guide rollers - for maximum utilization of the planing width.
• Disposable reversible knife system means no more time-consuming planing knife adjustment.
• High quality standard means lower machine costs and longer service life.
• Practical lightweight, ergonomic handle ensures exemplary handling.
• With guide rollers - for maximum utilization of the planing width.
• Disposable reversible knife system means no more time-consuming planing knife adjustment.
• High quality standard means lower machine costs and longer service life.
• Practical lightweight, ergonomic handle ensures exemplary handling.
• With guide rollers - for maximum utilization of the planing width.
• Disposable reversible knife system means no more time-consuming planing knife adjustment.
Mafell's new LO-FA multi-guide is suitable for use with the LO55 and LO65 Ec routers.
• The back-toothed blade facilitates retraction from the cut, which is especially easy if the blade is locked by the mechanical brake.
• The unique tilting blade guide allows right-angle cuts to be made up to 90 mm (3 9/16 in.) deep without the opposite side of the blade touching the wood, e.g. when cutting lapped joints.
• With a spring-mounted and tensioned idler wheel, changing blades is an easy and quick procedure.
• Twin-guide parallel fence with fine adjustment - for precise guidance.
• Individual setting of speed, cutting depth and guide - for a wide variety of applications.
• Considerable time-saving - due to fast cutting with the CUprex high-powered 2600 watt (3.0 hp) motor.
• Twin-guide parallel fence with fine adjustment - for precise guidance.
• Individual setting of speed, cutting depth and guide - for a wide variety of applications.
• Considerable time-saving - due to fast cutting with the CUprex high-powered 2600 watt (3.0 hp) motor.
System F1 Includes: 2 drivers 160cm, guide joint, two retaining clamps, in carrying case.
System F2 Includes: 1 guide 80cm, 1 guide 160cm, angle guide, guide joint, two retaining clamps, in carrying case.
Set 1 of 18pcs. It consists of: W 1 = 2pcs, W 2 = 4pcs, W 4 = 4pcs, W 5 = 4pcs, W + P2 = 4pcs.
Set 2 of 18pcs. It consists of: W 1 = 2pcs, W 6 = 4pcs, L 2 = 4pcs, W + M2 = 4pcs, M2 = 4pcs.
• Extremely compact and practical design.
• Ideal for sawing panels.
• Bevel and miter cuts - quick and easy.
Cordless Cross-Cutting System KSS 40 18M bl in the T-MAX
Cross cuts with guide
Rip cuts and cross-cutting
Plunge cuts, recesses and cutting shadow gaps from 13 mm (1/2 in.)
Compatible materials include board materials, doors, worktops, parquet and laminate flooring, solid wood
* KSS 40 bl PURE BM does not include the charger, batteries and Flexi-Guide FX 140.
1300W, with WIDIA disc 168mm, vertical cut, with integrated but removable chocorem guide, maximum cutting depth 58mm. Movement with LiHD 18V - 5.5Ah battery, in a metal carrying case, with 2 batteries and charger.
* Το KSS 50 bl PURE BM does not includes the batteries and charger.
Cross cuts with guide
Rip cuts and cross-cutting
Plunge cuts and recesses
Compatible materials include solid wood, board materials, insulating materials, doors, worktops and internal finishing and renovation materials
* KSS 60 cc BM version is offered in metal carrying case.
- Cross cuts with guide
- Rip cuts and cross-cutting
- Plunge cuts and recesses
- Compatible materials include solid wood, board materials, insulating materials, doors, worktops and internal finishing and renovation materials
* KSS 60 cc BM is offered in metal carrying case.
Cross cuts with guide
Rip cuts and cross-cutting
Plunge cuts and recesses
Compatible materials include solid wood, board materials, insulating materials, doors, worktops and internal finishing and renovation materials
